• Tel:0086-371-67816766
    Fax: +86-371-68617124
  • Kevin: +86-15038005999
    Angela: +86-15638227908
  • Add : Gongye Road and Tonghang Er Road crossing, Shangjie District, zhengzhou, Henan, China

How to use jaw crusher properly?

Published 2014/11/5 11:26:23

I. Method of start-up operation

  1. Start dusting system.
  2. Jaw crusher is started under no-load after receiving signal of lower technological process.
  3. After jaw crusher runs normally, start chute feeder for selection of feeding.
II. Processing method of parking and emergency cut off:
  1. Crusher can be stopped when ore is completely eliminated.
  2. For operation of parking, feeding system (chute feeder) shall be stopped.
  3. When crusher is shut down for 5 minutes, duster and water supply system shall be stopped. Avoid choosing shut down of duster and water supply system after parking.

III. For following circumstance, crusher shall be immediately stopped:

  1. If rapid temperatures arise of main bearing and movable jaw is more than 80℃, crusher shall be stopped immediately.
  2. When front and back thrust plate is broken, crusher shall be stopped immediately. 
  3. When belting bolt or other driving medium is cracked, it is likely to fly off and hurt worker and crusher shall be stopped immediately. 
  4. When electric machine sweeps a chamber, crusher shall be stopped immediately. 

We hope above details about jaw crusher may come to attention of everybody so that the crusher can be produced effectively.


UP:Right approach to blending problem of raw material and clinker of zinc-oxide rotary kiln
NEXT:Preparation before jaw crusher is running

Address:Gongye Road and Tonghang Er Road crossing, Shangjie District, Zhengzhou, Henan

Copy Right: Henan Hongke Heavy Machinery Co., Ltd. All rights reserved.