• Tel:0086-371-67816766
    Fax: +86-371-68617124
  • Kevin: +86-15038005999
    Angela: +86-15638227908
  • Add : Gongye Road and Tonghang Er Road crossing, Shangjie District, zhengzhou, Henan, China

Maintenance and repair of slag dryer

Published 2014/12/12 9:31:30

As maintenance and repair of slag dryer is regular work, quality of maintenance is directly affects running rate and service life. How to improperly maintain and repair slag dryer in using process? Hongke Heavy Machinery summarized some experience for reference according to many years of experience.



1. Bearing

Dryer bearing bears all loads of machine, so good lubrication is closely connected with bearing life, which directly affects machine service life and running rate. Therefore, injected lubricating oil is required to keep clean with good sealing. Main oiling position of this machine:

(1) rolling bearing (2) roll bearing (3) all wheel gears (4) live bearing and slide plane

2. Newly installed tyre is easy to loose and it shall be checked regularly.

3. Check if working of each part is normal.
4. Check wearing degree of easy wear part, and replace worn part at any time.
5. Under-frame plane that places movable equipment shall eliminate ash and other matters to avoid serious accident when machine meets material that cannot be crushed 
6. If bearing oil is rises, it should immediately shut down to check reason and eliminate it.
7. If there is impulsive sound in transmitting gear in operation, it should immediately shut down to check reason and eliminate it.


UP:Analysis of common failure cause of magnetic separator
NEXT:Skills for choosing dryer parts

Address:Gongye Road and Tonghang Er Road crossing, Shangjie District, Zhengzhou, Henan

Copy Right: Henan Hongke Heavy Machinery Co., Ltd. All rights reserved.