• Tel:0086-371-67816766
    Fax: +86-371-68617124
  • Kevin: +86-15038005999
    Angela: +86-15638227908
  • Add : Gongye Road and Tonghang Er Road crossing, Shangjie District, zhengzhou, Henan, China

How to Conduct Routine Inspection of Rotary Kiln

Published 2020/5/22 16:17:52

Rotary kiln is a very typical kiln, its operation is relatively simple and efficient, so it is welcomed by many users. We need to check the operation of kiln production, which is mainly to ensure the smooth operation of the kiln and to improve production efficiency. Then, let’s take a look at the contents of the kiln operation inspection:
   1. First of all, it is necessary to know whether the system running under the vehicle is working properly and whether the vehicle can be transported to the desired location.
   2. Sealing situation between kiln and kiln
   3. The actual operation of the track in the kiln, whether there are deformed parts, will it affect the operation of the kiln car.
   4. Whether all the thermal insulation performance of the rotary kiln is destroyed, will the heat dissipation increase after use.
   5. Sand sealing groove in the kiln to see if it is deformed, will it affect the sealing.
   6. Whether the cooling air system is running well.
   7. Whether the waste heat extraction and smoke exhaust system work normally, and whether it affects the normal operation of the kiln.
   8. Is there any crack on the rotary kiln, will it cause air leakage in the kiln and can it be repaired.
   9. Check if there is any obstruction in the ventilation duct, and whether the ventilation of the whole kiln is smooth.
   10. Check whether the inner passage is smooth, whether there are any obstacles that affect the under-vehicle cooling system, and whether the under-vehicle cooling fan is running well.
  The above is the introduction about the operation inspection of rotary kiln. There are many things that we need to pay attention to when we carry out inspection, so we must strictly require inspection work. Only in this way can we maintain the normal operation of the equipment and reduce equipment failures as much as possible to stabilize the benefits.


UP:Introduction of Three Heat Conduction Methods of Rotary Kiln
NEXT:Keep the Salt Content and Other Control Indexes of Rotary Kiln Water within the Specified Range

Address:Gongye Road and Tonghang Er Road crossing, Shangjie District, Zhengzhou, Henan

Copy Right: Henan Hongke Heavy Machinery Co., Ltd. All rights reserved.