• Tel:0086-371-67816766
    Fax: +86-371-68617124
  • Kevin: +86-15038005999
    Angela: +86-15638227908
  • Add : Gongye Road and Tonghang Er Road crossing, Shangjie District, zhengzhou, Henan, China

Dust Removal Method of Rotary Kiln

Published 2020/6/15 16:26:42

Rotary kiln belongs to the category of building material equipment, but it is inevitable that it will be contaminated with dust or oil during the operation of the equipment. Although it will not cause certain damage to the equipment, it will affect the production efficiency of the equipment. So we need to take some measures to remove the dust on the kiln, then, let’s introduce some methods to remove the dust from the kiln.
   1. Adopt high-pressure water gun
This method is to use water to expand under high temperature and high pressure, and then use a high-pressure water gun to shoot the water into the crust of the inner wall of the kiln tail, which will generate a huge impact force. The water suddenly vaporizes in the high-temperature material and produces a strong explosion, which is hit. Part of the material was shaken and collapsed, and finally the crust was removed, which achieved the function of clearing the blockage and crust of the rotary kiln preheater system.
   2. Using vibration method
   Sometimes the dust particles inside the filter bag of the kiln are large, which can be effectively treated by high-speed vibration without affecting other components.
   3. Use cleaning materials for cleaning
   Here refers to the selection of appropriate washing materials, remember to match the appropriate, but also use low-temperature water rotary kiln for co-cleaning, to maintain uniform cement, etc., which can greatly reduce damage.
   4. Adopt high temperature drying
   This method needs to control the temperature so that it is within a certain range, so that it can be dried with hot air without deforming it.
  This is the introduction of the dust removal method of rotary kiln. It mainly adopts four methods: high pressure water gun, vibration method, cleaning materials for cleaning and high temperature drying to remove dust from the kiln. So, in the future, when you choose a dust removal method, you can choose the dust removal method according to your actual needs.


UP:The Core Technology of Rotary Kiln
NEXT:The causes blockage of the rotary kiln

Address:Gongye Road and Tonghang Er Road crossing, Shangjie District, Zhengzhou, Henan

Copy Right: Henan Hongke Heavy Machinery Co., Ltd. All rights reserved.