How to Discharge the Gas in Rotary Kiln

时间:2020-05-20 作者 :adminhk

After the rotary kiln works for a period of time, part of the gas will be discharged from the workshop. How to carry out this part of work? In order to facilitate your understanding, in order to make you more proficient in the operation of this equipment, the following article for you to explain in detail, we come to understand it.

1. The air discharged from the rotary kiln decreases the indoor air pressure and thins the indoor air, forming a negative pressure area. The air flows into the room due to the compensation of air pressure difference.

2. In the practical application of the industrial workshop, it is concentrated on one side of the plant, the air inlet is on the other side of the workshop room, the air from the air inlet to the high-temperature rotary kiln forms the convective blowing. In this process, the doors and windows close to the vicinity are kept closed, and the forced air flows into the workshop through the air inlet in an orderly way It is discharged from the workshop.

3. The ventilation is complete and efficient, and the air exchange rate can be as high as 99%. Through the specific engineering design and the design of ventilation speed and wind speed according to the needs, any high heat, harmful gas, dust and smoke can be quickly discharged from the workshop, and any poor ventilation problems can be solved once and for all, and the ventilation can be achieved within seconds from the start-up of the station.

Through the content explained in the article, we can generally understand how the gas in the equipment is discharged. When the rotary kiln is ventilated in the workshop, we should understand its process. At the same time, doing this work well also ensures the safety of the staff. We can carry out specific operation practice according to the content explained in the article.