As the Chinese saying goes: "No action on 19th and 29th, March 9th and 49th, walk on the ice." It is the cold season and people wear thick cotton clothes. In fact, the crusher is also afraid of the cold and needs to be made. For those who work well against the cold, the editor below will introduce to you how to make your "love machine" survive the winter safely.

1. Cleaning of the crusher

In the cold winter season, the cleaning of the crusher must not be slack. The chassis, working devices and other parts of the crusher should be cleaned regularly to remove dirt and check whether the parts are in good condition.

2. Selection and replacement of oil

In the case of temperature comparison, the oil of the crusher is easy to wax, and the flow performance is not good, resulting in incomplete combustion and reducing the power of the machine. At this time, it is recommended to choose diesel with a lower freezing point and replace the lubricating oil and grease.

3. Maintenance of crusher parts

When maintaining the cooling system of the diesel engine, it is necessary to check the working condition of the thermostat. Once the mud and sand deposits in the water tank are found, they must be removed immediately. In addition, charge the battery frequently and maintain the preheating device.

In addition to the above points, it is also necessary to frequently check whether the brake fluid is sufficient. For the harsh environment, stop production appropriately or choose some relatively warm places.

Jaw crushers, impact crushers, cone crushers and other crushing equipment in a low temperature environment will not only reduce their service life, but also may freeze the water and oil in the crusher. Therefore, it is often necessary to check in winter. Necessary.