Selection of Common Transport Equipment for Ceramsite Production Line时间：2021-02-03 作者 ：adminhk
Ceramsite is a new type of energy-saving and environmental protection material. It has the characteristics of light volume, high compressive strength, low thermal conductivity, corrosion resistance, low water absorption, sound insulation, heat preservation, fire resistance, frost resistance, anti-corrosion and so on. It is used for cast-in-place concrete floor cushion, high-rise building exterior wall, seismic wall, elevator wall, roof insulation, slope making, garage roof backfilling, etc. It is widely used in shipbuilding, bridge engineering, kiln engineering, sewage treatment engineering and oil field engineering. It is also an ideal aggregate for the production of light partition board, roof insulation board, hollow block, sound-absorbing brick and unshaped fire-resistant casting.
In the production process of ceramsite, conveying equipment will be used in many places to transport the materials to the designated position and cooperate with other equipment to realize the automatic production of ceramsite. Due to the different types of conveying materials and the limited location of the site, a production line will use a variety of conveying equipment. The commonly used conveying equipment are: belt conveyor, bucket elevator, screw conveyor, wavy rib belt Conveyor, scale conveyor, etc.
Belt conveyor is the most commonly used conveying equipment, which has the advantages of strong conveying capacity, long conveying distance, relatively simple structure, easy maintenance, multi-point loading and multi-point unloading, etc. generally, the inclination angle of belt conveyor is not more than 25 ° and it is suitable for long-distance and small height difference working environment. The temperature of conveying materials is generally not more than 60 ℃, and the heat-resistant rubber belt can transport 120 ℃ The following high-temperature materials, with auxiliary equipment such as iron remover, measuring scale, etc., can realize the functions of iron removal and measurement of belt scale.
Bucket elevator is used for conveying powdery, granular and small pieces of materials when it is vertical or inclined. It has the characteristics of small size in cross section, small floor area and large lifting height. Generally, the lifting height is not more than 40m. It has th, TD, TDG and NE models. It is mainly suitable for the working conditions of short conveying distance, large height difference and vertical lifting height. Th type bucket elevator adopts forged ring chain as traction component, and discharge mode adopts mixed or gravity discharge. It is suitable for conveying powdery, granular and small pieces of low abrasive materials with loose density of less than 1.5t/m3, and the temperature of the transported materials is not more than 250 ℃.
Screw conveyor mainly transports powdery, granular and small pieces of materials, which is not suitable for conveying easily deteriorated, viscous and caking materials. The temperature of conveying materials is less than 200 ℃, the inclination angle of conveyor is less than 20 degrees, and the conveying length is less than 40m. Screw conveyor has the advantages of simple structure, small cross-section size, good sealing performance, multi-point loading and unloading, and is commonly used for conveying dry powder Easy lift materials, such as rice bran, mill outlet materials, dust collector outlet materials, etc.
Corrugated edge conveyor is commonly known as large inclination conveyor. It has a large allowable conveying angle, which can reach 90 ° and can achieve a smooth transition from horizontal to inclined (or vertical). It is an ideal equipment for large inclination conveying and vertical lifting. Compared with other conveyors, its prominent feature is that the conveying angle is large, which can be used for long-distance and large inclination conveying.
The scale conveyor is a kind of plate conveyor, which takes the circulating chain as the traction component and the scale hopper as the bearing component. It can transport all kinds of bulk materials along the horizontal or inclined direction (the inclination angle is less than 35 °). Because the bearing part and running part of the scale conveyor are made of metal materials, it can transport materials with high bulk density, large block size, sharp edges and strong abrasion to the conveyor, and it is suitable for transporting high temperature materials at 600 ~ 700 ℃.
When selecting the conveying equipment, the user should consider the material properties, working conditions, site requirements and other conditions to select the appropriate conveying equipment.
The above is ceramsite production line commonly used transport equipment selection, want to know more equipment information, welcome to consult our customer service personnel. Hongke heavy industry is a professional manufacturer of mining machinery and equipment, with rich technical accumulation and project experience. We sincerely invite you to visit our factory!