Email:[email protected]
Rotary Dryer
Rotary dryer, also known as rotary drum dryer,rotary drier.High humidity material dryer is a kind of drying equipment, which is developed by Henan Hongke company to meet the needs of the market. The whole set of dryer be composed offeeding part, drying part, heat source part, discharging part and waste gas treatment part. Raw material with 75% mositure can be dried, such as sludge, mud, animal manure, slag, etc.
According to different ways of heating raw material,the rotary dryer can be divided into direct heating-type rotary dryer and indirect heating-type rotary dryer. The rotary dryer can be classified into Coal Slime Rotary Dryer, Sawdust Dryer, Coconut shell dryer, slag rotary dryer and clay rotary dryer according to different raw materials.According to different structure, the rotary dryer can be divided into Three cylinder dryer, Double-drum Dryer.
Being widely used in building materials, metallurgy, chemicals, industrial drying slag cement limestone, coal, slag, clay and other materials.
The aircraft is mainly composed of the rotary, jan plate, transmission, seals, and other support equipment and components.
Being featured with a reasonable structure, well-produced, high yield, low consumption and operating convenience.
Offering products quality assurance, and highest free installation debugging agent can be checked with other plants than quality and prices.
How to improve rotary dryer's efficiency
1. Improving temperature of drying medium of rotary dryer.
2. Improving flow rate of drying medium.
3. Improving internal structure of cylinder body of rotary dryer, adopting combined raise material.
4. Reducing material feeding granularity
5. Using concurrent processing set-up where possible
6. Adopting step-less speed regulator
Specifications of Rotary dryer
1. Standard testing
2. High process speed
3. Stable working conditions
4. ISO9000 and BV
Working principle of Rotary dryer
When rotary Dryer is operating, it shall be in direct contact with heated gas. The dryer consists of a large rotating cylindrical tube. In order to convey the material through the underside of dryer, the dryer should be slanted slightly to ensure that the discharge end is lower than the end of material feed.
Material shall be dried to enter the dryer. When the dryer is rotating, a series of internal fins will lift the material by lining the inner wall of the dryer. When the material reaches certain height to roll the fins back, it will be fell back to the bottom of the dryer, then passing through the hot gas stream as it falls. This gas stream can either move toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be composed of a mixture of air and combustion gases from a burner, and in which case the dryer is known as a direct heated dryer. Alternatively, the gas stream may be made up of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases are not permitted to enter the dryer, the dryer shall be called an indirect-heated type. Indirect heated dryers are commonly used when product contamination becomes a concern.
Technical Parameter
Model | Capacity | Feed moisture | Discharge moisture | Main motor | Speed reducer |
Φ600*8m | 0.5-1.2 | 70±5 | 15±5 | 2.2 | 200 |
Φ600*10m | 0.5-1.5 | 70±5 | 15±5 | 3 | 250 |
Φ800*8m | 0.8-1.5 | 70±5 | 15±5 | 5.5 | 250 |
Φ800*10m | 0.8-1.8 | 70±5 | 15±5 | 5.5 | 250 |
Φ1000*10m | 1.0-3.5 | 70±5 | 15±5 | 7.5 | 250 |
Φ1000*12m | 1.0-3.8 | 70±5 | 15±5 | 7.5 | 250 |
Φ1200*12m | 1.2-3.5 | 70±5 | 15±5 | 11 | 350 |
Φ1200*15m | 1.2-4.0 | 70±5 | 15±5 | 11 | 350 |
Φ1500*15m | 2.0-5.5 | 70±5 | 15±5 | 22 | 500 |
Φ1800*16m | 3.5-6.5 | 70±5 | 15±5 | 22 | 500 |
Φ1800*20m | 4.0-6.5 | 70±5 | 15±5 | 30 | 650 |
Φ2000*20m | 5.0-7.0 | 70±5 | 15±5 | 37 | 650 |
Φ2000*22m | 5.0-.7.0 | 70±5 | 15±5 | 37 | 650 |
Φ2400*22m | 5.5-8.0 | 70±5 | 15±5 | 45 | 650 |
Φ2400*26m | 7.0-16 | 70±5 | 15±5 | 55 | 750 |
Φ3000*20m | 15-25 | 70±5 | 15±5 | 55 | 850 |
Φ3000*25m | 15-30 | 70±5 | 15±5 | 75 | 850 |
Φ3300*25m | 25 | 70±5 | 15±5 | 75 | 1000 |
Φ3500*25m | 30 | 70±5 | 15±5 | 90 | 1000 |
China Professional Drying Machine Manufacturer